Services
Asphalt Milling & Pulverizing in Arizona
Asphalt milling contractors trusted for pavement milling and pulverizing, full depth reclamation, and mill and overlay parking lot projects in Phoenix, Scottsdale, Mesa, and throughout Arizona, self-performed by in-house crews and backed by a 2-year workmanship warranty.
RESTORE & RECYCLE THE PAVEMENT
When asphalt surfaces become worn, rutted, or alligator-cracked, asphalt milling and pavement milling and pulverizing are the cost-effective path to a like-new surface without the expense of full reconstruction. American Asphalt has been milling roads, parking lots, and industrial sites in Phoenix, Mesa, Chandler, Gilbert, and throughout Arizona for more than 30 years, a family-owned, ROC-licensed asphalt milling contractor property managers and municipalities call back project after project.
What is the difference between milling and pulverizing asphalt? Milling shaves off only the top damaged lift and leaves the base intact, while full depth reclamation in Phoenix and surrounding cities grinds asphalt and base together into a stabilized aggregate when the distress runs deeper. Where the subgrade itself is soft or unstable, our subgrade correction and excavation crews correct it before reclamation, and once the platform is compacted we place the new hot-mix overlay to spec.
- Cold-milling to precise target depth
- Full-depth pulverization / FDR
- Recycled RAP or on-site reclaimed base
- Grade & drainage correction
- MAG 321 / ADOT 416 overlay
- 2-year workmanship warranty
Since 1993
30+
Years milling Arizona pavement
SAVE MONEY, KEEP YOUR BASE
Milling and pulverizing extend pavement life by recycling the material already in place, lower cost than reconstruction, faster to complete, and a stronger platform for the new overlay.
Costs a fraction of full reconstruction
A mill and overlay parking lot project, or full depth reclamation for deeper failures, recycles the pavement you already own, cutting mill and overlay cost per square foot well below a full remove-and-rebuild in Arizona.
Recycles pavement in place
Reclaimed asphalt is reused as base or hauled to plant as RAP. Pulverization keeps the material on-site as a stronger, blended aggregate foundation.
Restores drainage & grade
Profile milling corrects rutting, ponding, and cross-slope issues so the new overlay drains properly instead of trapping water and re-cracking.
Stronger foundation for repaving
Full-depth reclamation stabilizes weak or fatigued base into a uniform, denser platform, the right prep when the failure runs below the surface.
Fast turnaround, minimal downtime
Most milling and pulverizing projects for Phoenix-area retail centers, HOAs, and industrial yards finish in 1–3 days, phased so tenants, deliveries, and traffic keep moving.
Environmentally responsible
Recycling existing asphalt reduces landfill waste, hauling, and new virgin aggregate demand, a lower-impact path to a like-new surface.
FULL-SERVICE MILLING CONTRACTOR
From single-lot surface milling to multi-mile roadway mill-and-overlay and full-depth pulverization projects, we self-perform every step, survey, traffic control, mill, haul, grade, tack, place, compact, with in-house crews and equipment we own and operate.
- Cold-milling & surface planing
- Full-depth reclamation (FDR)
- Mill & hot-mix overlay
- Grade profiling & drainage correction
Service Area
Statewide, Arizona
Warranty
2-Year Workmanship
ROC Licensed
155730 / 109709 / 105759
Experience
30+ Years In-House
MILLING & PULVERIZING SCOPES
Surface milling, full depth reclamation, mill and overlay parking lot restoration, roadway and industrial milling, butt-and-taper transitions, and profile grade correction, self-performed for clients from Tempe and Glendale to Queen Creek and Buckeye.
SURVEY, MILL, REPAVE
A milled surface is only as good as the depth control, cross-slope, and clean transitions cut into it. Every American Asphalt mill or pulverization job follows the same disciplined sequence so the overlay ties in flush and drains correctly, and once grade is set, our crews handle raising manholes, valve covers, and cleanouts to match the new pavement elevation before final rolling.
Field video from an American Asphalt project, the same in-house crews and equipment we run on every mill, pulverization, and overlay contract.
- 01Step
Survey & scope
We measure square footage, evaluate distress, check base condition, and confirm whether surface milling or full-depth pulverization is the right method.
- 02Step
Traffic control & prep
MUTCD traffic-control setup, utility locates, and any needed sawcut headers at driveways, gutters, and match points before the mill runs.
- 03Step
Mill or pulverize
Cold-mill to target depth for surface work, or full-depth pulverize asphalt and base together into a uniform, compactable, stabilized aggregate.
- 04Step
Grade, compact & repave
Millings hauled or blended, the reclaimed platform is graded and compacted, and a new hot-mix asphalt lift is placed and rolled to spec.
MILLED & REPAVED TO SPEC
Every mill, pulverization, and overlay we deliver is built to a published material and workmanship standard. Below are the specifications and credentials most commonly referenced on the commercial, HOA, and public-agency milling work we perform.
MAG Section 321 – HMA Overlay
Milled surfaces prepped and overlaid with hot-mix asphalt to Maricopa Association of Governments Section 321 mix, placement, and compaction requirements.
ADOT Section 416 – HMA Pavement
Milling, prep, and overlay produced and placed to ADOT Standard Specifications for Road and Bridge Construction on public roadway and agency work.
FDR / Pulverization Best Practices
Full-depth reclamation performed to ARRA / FHWA guidance, uniform gradation, moisture control, and compaction of the reclaimed base platform.
ROC Licensed & Bonded
Licensed by the Arizona Registrar of Contractors under ROC 155730, 109709, and 105759, bonded, insured, and cleared for commercial contracts statewide.
2-Year Workmanship Warranty
All milling, pulverizing, and overlay work is backed by a 2-year workmanship warranty on materials placed and installation performed by our crews.
MUTCD Traffic Control
Traffic-control plans built to the Manual on Uniform Traffic Control Devices with certified supervision on all public roadway milling.
Mill & Overlay Scope
- Site survey with distress mapping & milling depth plan
- MUTCD traffic-control setup & flagging
- Cold-milling or full depth reclamation
- Millings haul-off or on-site RAP blending
- Subgrade correction, moisture-condition & recompact base
- Manhole and valve adjustments to new grade
- Tack coat & hot-mix asphalt overlay placement
- Final rolling, joint sealing, clean sweep & 2-year warranty
Commercial, HOA, Municipal & Industrial
From retail centers and office parks to industrial yards, HOA road networks, municipal streets, and ADOT roadway projects, American Asphalt is a single, self-performing milling and pulverizing partner for the full range of Arizona pavement.
Milling & Pulverizing Questions
Straight answers from the estimators and crews who do the work across Arizona. Don't see your question? Call our office and talk to a real person.
Ready to protect
your pavement?
Get a free estimate on asphalt paving, slurry seal, sealcoating, striping, and full-service pavement maintenance from Arizona's trusted asphalt experts, serving commercial, HOA, and municipal properties statewide.
Hours
Mon-Fri 7 AM - 5 PMSat-Sun Closed